Today, at long last, I had enough extra hands to help move the drawloom from a second floor room down to my new studio space, the main floor of my home. The loom dismantles quite quickly, everything was carried down, each of us had pockets full of bolts, nuts and washers (and instructions to remember which part of the loom each pocket of hardware came from). We re-assembled nearly everything, still needing to add the upper and lower lamms and the treadles. The shafts need work as they are tied in the old way, no Texsolv on them yet, though I’m considering it. The drawcord warp will need to be unwound, re-threaded in the reed, and beamed again, or completely replaced. A trip to the hardware store is needed to check for heavier cord for the counterweights.
Still, I am so pleased this change in location of my weaving studio is finally taking place. More swapping of furniture and weaving equipment will take place over the next couple days.
I’ve been working on a 15 yard cottolin warp, unbleached and white stripes for a series of towels and table runners. As my loom is a horizontal countermarche, there are cords running down the middle of the loom, so warps are made in two halves then beamed together. Pics of back-t0-front warping will be added soon.